greatworks

Huawei SmartAX MT880. Huawei SmartAX MT880 on gecid.com. Huawei SmartAX MT800. Model Manufacturer Chip ChipMaker Firmware Software xDSL. Find the default login, username, password, and ip address for your Huawei SmartAX MT880 Huawei Firmware router. You will need to know then when you get.

1. Huawei Firmware Finder
2. Huawei Smartax Mt880 Firmware Upgrade Download

SmartAX MT820/MT882
MT820 and MT882 ADSL combo Modem, with one Ethernet interface and one USB interface, are suitable for both residential and SOHO broadband users.
·Small and Smart, plug and play, stable
·Easy set-up wizard

Huawei Firmware Finder

·Remote management;
·MT820/MT882 gives full consideration to the household arrangements, enabling horizontal and vertical positions as well as hanging on the wall.
General Specifications

Standards*	ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite), ITU G.994.1 (G.hs), ANSI T1.413 Issue # 2, ITU-T G.992.5 (ADSL2+), ITU-T G.992.5 Annex L (G.lite)
Data Transfer Rate	ADSL: Downstream up to 8 Mbps, Upstream up to 896 Kbps ADSL2+: Downstream rate of 26 Mbps, upstream rate of 1M bps G.992.5 Annex L: Max. transmission distance of 6.5 kilometers
External Interface	WAN: One RJ-11 port for ADSL line connection LAN: One USB port for USB cable connection One RJ-45 port for 10/100 Base-T Ethernet connection
PC Software	Windows 98/SE/2000/ME/XP; Mac OS 9 and X; Linux
Features	Supporting 1483B bridging and routing function Supporting DHCP server, NAT/NAPT , PAP/CHAP, IP Filter, Firewall, protocol block Built-in PPPOE/PPPOA dialing

Physical and Environmental Specifications

Power Supply	AC: 90~240V, power adapter: 9 V AC 1A
Power Consumption	< 9W
Operating Temperature	0° to 40°C ( 32° to 104°F)
Humidity	5 to 95% (non-condensing)
Dimensions	135mm * 110mm * 28mm
Net Weight	190g
LED Indicators	Power, ADSL Link , ADSL ACT, LAN Link and USB

SmartAX MT840
The MT840 is an ADSL home gateway for triple-play, Internet cafés, SOHO and business application. With 4 Ethernet ports and functions of routing, VPN and QoS, the MT840 provides a simple, cost-effective and stable ADSL Internet connection for your small to medium-sized private network.
General Specifications

Standards	ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), ITU-T G.994.1 (G.hs), ANSI T1.413 Issue # 2
Data Transfer Rate	G.dmt full rate and T1.413: Downstream up to 8 Mbps, Upstream up to 896 Kbps G.lite: Downstream up to 1.5 Mbps, Upstream up to 512 Kbps
External Interface	WAN: One RJ-11 port for ADSL line connection LAN: Four RJ-45 ports for 10/100 Base-T Ethernet connection
PC Software	Windows 98/SE/2000/ME/XP; Mac OS 9 and X; Linux
Gateway Features	Supporting RIP, static routing , basic local layer 2 Ethernet switch, DHCP server/client/forwarding ,DNS forwarding, NAT/NAPT, firewall, ARP,

Physical and Environmental Specifications

Power Supply	AC: 90~240V, power adapter: 12 V AC 1.2A
Power Consumption	< 9.3W
Operating Temperature	0° to 40°C ( 32° to 104°F)
Humidity	5 to 95% (non-condensing)
Dimensions	135mm * 110mm * 28mm
Net Weight	320g
LED Indicators	Power, ADSL Link, ADSL ACT, LAN Link and LAN ACT

< prev > < next > 2 of 5

Also See for SmartAX MT880

Huawei Smartax Mt880 Firmware Upgrade Download

User Manual

Advertisement

Also See for Huawei SmartAX MT880

Related Manuals for Huawei SmartAX MT880

• Network Router Huawei SmartAX MT882 User Manual
  Adsl router (61 pages)
• Network Router Huawei SmartAX MT800 User Manual
  Adsl (109 pages)
• Network Router Huawei ADSL2+Broadband Router Aolynk DR814 User Manual
  Huawei adsl2+broadband router user manual (77 pages)

• Network Router Huawei AR1200 series Configuration Manual
  (217 pages)
• Network Router Huawei quidway s3526 series Getting Started
  (894 pages)
• Network Router Huawei AR1200 Series Configuration Manual - Voice
  (65 pages)

Summary of Contents for Huawei SmartAX MT880

• Page 1: User Manual

  SmartAX MT880 ADSL Router User Manual HUAWEI TECHNOLOGIES CO., LTD.
• Page 2 Copyright © Huawei Technologies Co., Ltd. 2006. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

• Page 3: Safety Precautions

  Avoid collision during storage, transportation and operation of the equipment. Without prior written consent from Huawei, no company or individual is allowed to decompile, disassemble, modify or reverse engineer the equipment and shall be solely responsible for any effect resulted from such action.
• Page 4 In case of long-time operation, temperature of the equipment shell will go up. This is a normal phenomenon. Cleaning: Before cleaning the equipment, turn off the equipment and unplug the power supply. Clean the equipment shell with a piece of soft cloth. It is forbidden to spray liquid onto the equipment, to avoid damage to the internal circuit.

• Page 5: Table Of Contents

  Table of Contents Chapter 1 Introduction ................3 1.1 Functions and Features............3 1.2 Hardware Configuration ............3 1.2.1 Front Panel ..............4 1.2.2 Rear Panel..............5 1.2.3 Splitter.................6 Chapter 2 Installation of the MT880............7 2.1 Preparation................7 2.2 Connecting the MT880 ............7 2.3 Establishing Configuration Environment .......9 2.3.1 Parameter Configuration..........9 2.3.2 Steps................9 2.4 Introduction to the Configuration Management Interface..10...
• Page 6 3.4.2 Steps.................19 3.5 Configure the PPPoA mode ..........21 3.6 Configuring the DHCP Mode..........21 3.6.1 Preparation ...............21 3.6.2 Steps.................22 3.7 Configuring the Static IP Mode ...........23 3.7.1 Preparation ...............23 3.7.2 Steps.................24 3.8 Configuring the IPoA Mode ..........26 Chapter 4 Other Settings ..............27 4.1 Changing the IP Address of the LAN of the MT880....27 4.2 Changing the Administrator Password of the MT880 ..28 4.3 Restoring the Default Factory Settings .......28...

• Page 7: Chapter 1 Introduction

  Chapter 1 Introduction This chapter introduces functions and structure of the SmartAX MT880 ADSL terminal (hereinafter referred to as the MT880). 1.1 Functions and Features The MT880 is a kind of Asymmetric Digital Subscriber Line (ADSL) terminal. Through the MT880, data, video and audio are transmitted at high rate in the common telephone line.

• Page 8: Front Panel

  Note: Figures of the front panel and the rear panel are only for your reference. 1.2.1 Front Panel Figure 1-1 shows the front panel of the MT880. Figure 1-1 Front panel of the MT880 Table 1-1 shows descriptions of indicators of the MT880 in the front panel.

• Page 9: Rear Panel

  Indicator Color Status Description There is traffic over the ADSL Green Blinking interface. ADSL ACT No data is transmitted through the Green ADSL interface. The Ethernet interface is normally Green connected and the data is transmitted at 10 Mbit/s. The Ethernet interface is normally LAN LINK Orange connected and the data is...

• Page 10: Splitter

  Figure 1-2 Rear panel of the MT880 Table 1-2 shows descriptions of interfaces and buttons of the MT880 in the rear panel. Table 1-2 Descriptions of Interfaces and Buttons Interface/Button Description It is used to connect with the Modem interface of a ADSL splitter.

• Page 11: Chapter 2 Installation Of The Mt880

  Chapter 2 Installation of the MT880 This chapter introduces the installation preparation before the MT880 is used at the first time. 2.1 Preparation Connect your computer and the MT880 through the Ethernet interfaces. Before installing the MT880, make sure your computer is installed with the Ethernet card.
• Page 12 (1) PC (2) Phone (3) RJ-45 Ethernet cable (4) RJ-11 telephone line (5) Splitter (6) RJ-11 telephone line (7) RJ-11 telephone line (8) Phone jack (9) MT880 Connect the MT880 as follows: Caution: Before connecting the MT880, power off the MT880 and your computer.

• Page 13: Establishing Configuration Environment

  2.3 Establishing Configuration Environment You can configure the MT880 through the Web configuration page. This chapter introduces to you how to establish the configuration and management environment of the MT880. 2.3.1 Parameter Configuration Before establishing the configuration environment, set the following parameters.

• Page 14: Introduction To The Configuration Management Interface

  Step To... Do... Do as follows to unselect this function by using the Make sure to Internet Explorer 6.0 as an example. unselect Use a (1) Start the Internet Explorer. Select Tools > proxy server Internet Options... to display the Internet for your LAN Options dialog box.
• Page 15 The navigation tree. It is in the left side of the page. If you click a link of it, you can enter the corresponding configuration and management interface. Configuration and management area. It is in the right side of the page.

• Page 16: Chapter 3 Service Configuration

  Chapter 3 Service Configuration This chapter introduces how to use the Web configuration page to configure the MT880. Note: The pages in the introduction to the configuration operation are only for your reference. 3.1 Method 3.1.1 Protocol Model Figure 3-1 shows the protocol model of the connection of the MT880 and the access equipment DSLAM in the office end.

• Page 17: Steps

  From the table, you can know that the transmission of the MT880 and the DSLAM is based on the Asynchronous Transfer Mode (ATM). To realize all kinds of service modes of the MT880, configure parameters of the MT880. For example, configure the Permanent Virtual Channel (PVC) parameter.

• Page 18: Service Modes Of The Mt880

  3.2 Service Modes of the MT880 The MT880 supports multiple service modes. Select a service mode by considering the configuration of the DSLAM in the office end and referring to Table 3-1. Table 3-1 the MT880 service model introduction Service Working Method Configuration Mode...

• Page 19: Configuring The Pure Bridge Mode

  Service Working Method Configuration Mode Take the MT880 as a router. The MT880 uses the static public IP Refer to 3.8 IPoA address to access the Internet. 'Configuring the IPoA Mode'. Use the IPoA encapsulation mode to encapsulate the packets. Note: ISP = Internet Service Provider IPoA = Internet Protocols over ATM...

• Page 20: Steps

  Table 3-2 Configuration for the pure bridge mode Name Configuration PVC Mode Pure Bridge PVC Operation Mode Enable VPI/VCI Provided by the ISP Encapsulation Provided by the ISP Install the PPP dial-up software to your computer to access the Internet (The PPP dial-up software Windows XP operation system is provided with the PPP dial-up software)
• Page 21 Select Pure Bridge in the PVC change page. Set the operation mode to Enable. Configure relevant parameters in Figure 3-2 according to the values in the Table 3-2. Figure 3-2 Configuring the pure bridge mode Click Submit. Select Tools > Save & Reboot in the navigation tree. Select Save in the Save/Reboot page.

• Page 22: Configuring The Pppoe Mode

  Select Connect to the Internet and click Next. Select Set up my connection manually and click Next. Select Connect using a broadband connection that requires a username and password and click Next. Enter the name of the connection you are creating. Then click Next.

• Page 23: Steps

  Name Configuration Username and password for the Provided by the ISP PPPoE dial-up DHCP mode of the MT880 Enable the DHCP server Note: After the DHCP server is enabled, the MT880 can allocate the private IP address for the computer. 3.4.2 Steps 1.
• Page 24 Figure 3-3 Configuring the PPPoE mode Click Submit. Select Basic > DHCP in the navigation tree to display the DHCP configuration page. Select DHCP Server in the DHCP configuration page. Click Submit. Select Tools > Save & Reboot in the navigation tree. Select Save in the Save/Reboot page.

• Page 25: Configure The Pppoa Mode

  2. Configuring Your Computer Configure your computer NIC, to make the computer to auto obtain information, such as the IP address, gateway and Domain Name Server (DNS). 3.5 Configure the PPPoA mode In the PPPoA mode, the MT880 uses the built-in PPP dial-up software to dial a number.

• Page 26: Steps

  Name Configuration The DHCP mode of the Enable the DHCP server MT880 3.6.2 Steps 1. Configuring the MT880 Do as follows to configure the MT880: Log in to the Web configuration page. For the method, refer to 2.3 'Establishing Configuration Environment'. Select Basic >...

• Page 27: Configuring The Static Ip Mode

  Click Submit. Select Basic > DHCP in the navigation tree to display the DHCP configuration page. Select DHCP Server in the DHCP configuration page. Click Submit. Select Tools > Save & Reboot in the navigation tree. Select Save in the Save/Reboot page. Click Submit to save the configuration.

• Page 28: Steps

  Name Configuration IP address/subnet IP address and subnet mask for the MT880 to mask access the network are provided by the ISP IP address of the IP address of the gateway for the MT880 to access gateway the network is provided by the ISP DHCP mode of the Enable the DHCP server MT880...
• Page 29 Figure 3-5 Configuring the static IP Click Submit. Select Basic > DHCP in the navigation tree to display the DHCP configuration page. Select DHCP Server in the DHCP configuration page. Click Submit. Select Tools > Save & Reboot in the navigation tree. Select Save in the Save/Reboot page.

• Page 30: Configuring The Ipoa Mode

  3.8 Configuring the IPoA Mode It is similar to configure the IPoA mode as to configure the static IP mode. The differences are: if configure the IPoA mode, select IPoA in the PVC configuration mode; if configure the static IP mode, select Static IP in the PVC configuration mode.

• Page 31: Chapter 4 Other Settings

  Chapter 4 Other Settings 4.1 Changing the IP Address of the LAN of the MT880 You can access the Web configuration page of the MT880 through the IP address of the LAN of the MT880. The IP address of the LAN of the MT880 is configured by default, you can change it as follows: Log in to the Web configuration page of the MT880.

• Page 32: Changing The Administrator Password Of The Mt880

  4.2 Changing the Administrator Password of the MT880 The Web manager of the MT880 provides the password protection function to prevent illegal users from changing the configuration of the MT880. The username and the password of the MT880 are configured by default. You can do as follows to change the administrator password: Log in to the Web configuration page of the MT880.
• Page 33 1. Using the Reset button Do as follows: Find the Reset button in the rear panel of the MT880 Use the spiculate thing to press the Reset button, and then release it. 2. Using the Web Manager Do as follows: Select Tools >...

• Page 34: Chapter 5 Troubleshooting

  Chapter 5 Troubleshooting 5.1 Quick Failure Location Problem Solution Ensure that the power adapter matches the MT880. The Power Ensure that the MT880 is connected to the power indicator is not on supply properly. Ensure that the Power button is pressed. Ensure that the ADSL line is connected properly.

• Page 35: Faqs

  Make sure that no telephone or fax machine is connected directly to the ADSL line. Replace the old ISA network adapter with a new 10/100 M PCI network adapter and install the latest driver. Find help on http://www.huawei.com.
• Page 36 2. What to do if the username and password of the Web configuration page are forgotten? If the username and password of the Web configuration page are forgotten, configure the MT880 to the default factory settings. Use the default username and password to access the Web manager. For restoring the default factory settings, refer to 4.3 'Restoring the Default Factory Settings'.

• Page 37: Chapter 6 Technical Specifications

  Chapter 6 Technical Specifications Main Technical Specifications ITU G.992.1 (G.dmt) Annex A ITU G.992.2 (G.lite) Annex A ADSL standard ITU G.994.1 (G.hs) ANSI T1.413 Issue 2 Standard ITU G.992.3 (G.dmt.bis) Annex A ADSL2 standard ITU G.992.4 (G.lite.bis) Annex A ADSL2+ standard ITU G.992.5 Annex A The maximum downstream rate G.dmt...

• Page 38: Chapter 7 Appendix

  Chapter 7 Appendix 7.1 Default Factory Settings 7.1.1 Common Default Parameters Item Default Value Username of administrator admin Password of administrator admin IP address 192.168.1.1 Subnet mask 255.255.255.0 DHCP mode None Enable 7.1.2 Default PVC Parameters Sequence Mode Pure bridge Pure bridge Pure bridge Pure bridge...

• Page 39: Abbreviations

  7.2 Abbreviations ADSL Asymmetric Digital Subscriber Line Asynchronous Transfer Mode DHCP Dynamic Host Configuration Protocol Domain Name Server DSLAM Digital Subscriber Line Access Multiplex Internet Protocol IPoA Internet Protocols over ATM Internet Service Provider Local Area Network Personal Computer Network Interface Card Point-to-Point Protocol PPPoA PPP over ATM...
• Page 40 HUAWEI TECHNOLOGIES CO., LTD Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R.China www.huawei.com 103002...